Path: utzoo!utgpu!watserv1!watmath!att!att!tut.cis.ohio-state.edu!cs.utexas.edu!uunet!jwt!john
From: john@jwt.UUCP (John Temples)
Newsgroups: comp.unix.sysv386
Subject: Re: VPIX / MS-DOS Kermit query
Message-ID: <2291@jwt.UUCP>
Date: 23 Nov 90 17:57:15 GMT
References: <1990Nov19.200307.42824@cc.usu.edu>
Organization: Private System -- Orlando, FL
Lines: 13

In article <1990Nov19.200307.42824@cc.usu.edu> jrd@cc.usu.edu writes:
>	VPIX (aka Simutask) and MS-DOS Kermit -
>	I have a stable of AT&T Unix machines SV3.2 and I also found that
>Kermit would not run. The reason seemed to be, as I recall, that the address
>in segment 40h for the serial ports was empty.

I had the same problem running TAPCIS under "real" DOS.  For some
unknown reason, my AT didn't recognize the serial port in my Everex
internal modem, and the equipment flag at 40h showed no serial ports.
I ended up writing a short assembly program to poke the appropriate
value into the equipment flag, and everything was resolved.
-- 
John W. Temples -- john@jwt.UUCP (uunet!jwt!john)