Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!uunet!virtech!cpcahil
From: cpcahil@virtech.uucp (Conor P. Cahill)
Newsgroups: comp.unix.sysv386
Subject: Re: SCSI tape under ISC 2.2?
Message-ID: <1990Nov26.131759.23783@virtech.uucp>
Date: 26 Nov 90 13:17:59 GMT
References: <148@xyzoom.UUCP>
Reply-To: cpcahil@virtech.UUCP (Conor P. Cahill)
Distribution: na
Organization: Virtual Technologies Inc., Sterling VA
Lines: 17

In article <148@xyzoom.UUCP> rob@xyzoom.info.com (Rob Lingelbach) writes:
>Is anyone using SCSI tape under ISC 2.2?

Yes.  Just plug the tape drive into the system, configure the HPDD and
voila you have a tape drive.  You might have to create entries for the
tape devices but this is well documented in the Maintenance Procedures 
manual (section 7.1.7.2). 

As a second note, I have used several tape drives that are not in the
list with no problems (just configured them as a generic scsi tape 
drive).


-- 
Conor P. Cahill            (703)430-9247        Virtual Technologies, Inc.,
uunet!virtech!cpcahil                           46030 Manekin Plaza, Suite 160
                                                Sterling, VA 22170