Xref: utzoo comp.periphs:3295 comp.sys.ibm.pc:54575 Path: utzoo!utgpu!news-server.csri.toronto.edu!rutgers!usc!zaphod.mps.ohio-state.edu!sol.ctr.columbia.edu!emory!utkcs2!lape From: lape@.cs.utk.edu (Bryon S. Lape) Newsgroups: comp.os.msod.misc,comp.periphs,comp.sys.ibm.pc Subject: CD-ROM under Windows 3 (HELP!!) Message-ID: <1990Dec1.190427.6612@cs.utk.edu> Date: 1 Dec 90 19:04:27 GMT Sender: news@cs.utk.edu (USENET News System) Organization: University of Tennessee, Knoxville - CS Department Lines: 19 Originator: lape@hydra1a.cs.utk.edu Dear Netlanders, I am in need of a device driver that works under Windows 3.0 correctly and can use extended memory. The piece of hardware in question is an Amdek Laserdrive-1. The device driver that comes with it works fine if I exit Windows, but does strange things under Windows (like getting an invisible cursor when looking at the directory under Programme Manager) to not working at all. The computer that this is running on is a Tandy 4000 with 4 megs memory and VGA. It is a 386 and Windows is running in 386 mode. Using something like DesqView is not an option (besides it never really ran under DesqView do to memory requirements). There is an AppleTalk card in the computer as well and an 80-meg SCSI hard drive. Please e-mail all responses since I do not subscribe to all of the newsgroups to which I am sending this request. Thanks in advance, Bryon Lape Brought to you by Super Global Mega Corp .com