Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!samsung!emory!gatech!uflorida!SIROTTO@MAPLE.CIRCA.UFL.EDU
From: sirotto@oak.circa.ufl.edu (Mike Cerrato)
Newsgroups: comp.sys.amiga
Subject: Re: JRComm doesn't like my Modem
Message-ID: <00940828.7D2D1E40@MAPLE.CIRCA.UFL.EDU>
Date: 1 Dec 90 05:04:14 GMT
References: <36319@cup.portal.com>
Sender: news@uflorida.cis.ufl.EDU
Reply-To: sirotto@oak.circa.ufl.edu (Mike Cerrato)
Organization: University of Florida CIRCA VAX Cluster
Lines: 27

In article <36319@cup.portal.com>, Lee_Robert_Willis@cup.portal.com writes:
>
>I've read a lot of good things about JRComm from this group, so I decided
>to give it a try.  PROBLEM: JRComm doesn't talk to my Modem.  When I try to
>dial a number, nothing happens.   I have a SupraModem 2400, which works
>just fine with every other comm program I've tried.   I've looked through
>the JRComm docs and my Modem docs, and I have no idea what the problem is.
>Anybody got a helpful suggestion?


I am using JRComm and a SupraModem 2400 and have never had any problem . . .

In addition to what was already suggested, make sure your modem is set up like
the manual specifies.  If it is just plain not working then that is probably
not the problem, but if you are getting some kind of error from JRComm, that
might be.  Also, check in the General set-up window (in the Options menu) for
the "Serial Device" option.  You should see "serial.device" there (assuming you
are using the built in serial port).  If you copied JrComm from someone else,
it might be right.  Other than that, I have no suggestions . . .
           ___  __
|\   |\   |    /  \			Gallant Knight of a rather
| \  | \  |   /				large, squarish table someplace
|  \ |  \ |--<	      SirOtto		in the West Panhandle of Florida.
|   \|   \|___\____/

Michael E. Cerrato	Internet: SIROTTO%maple.decnet@pine.circa.ufl.edu
University of Florida