Xref: utzoo comp.sys.amiga:73193 comp.sys.amiga.hardware:4872
Path: utzoo!attcan!uunet!cbmvax!rutgers!usc!sdd.hp.com!uakari.primate.wisc.edu!caen!sol.ctr.columbia.edu!emory!ogicse!pdxgate!eecs!jayward
From: jayward@eecs.cs.pdx.edu (Jay Ward)
Newsgroups: comp.sys.amiga,comp.sys.amiga.hardware
Subject: Re: Speed of HardFrame/2000 and Quantum Q105S (problem) (longish)
Keywords: HardFrame, Quantum
Message-ID: <806@pdxgate.UUCP>
Date: 1 Dec 90 00:57:00 GMT
References: <2279@lpami.wimsey.bc.ca> <600@cbmger.UUCP>
Sender: news@pdxgate.UUCP
Reply-To: jayward@eecs.UUCP (Jay Ward)
Organization: Portland State University, Portland, OR
Lines: 25

In article <600@cbmger.UUCP> peterk@cbmger.UUCP (Peter Kittel GERMANY) writes:
>In article <2279@lpami.wimsey.bc.ca> lphillips@lpami.wimsey.bc.ca (Larry Phillips) writes:
>
>Sorry Larry, you're normally right, but not in this point. It was
>officially stated by Commodore that you may mix KS 1.2/1.3 with WB 1.2/1.3
>in every possible combination! The only disadvantage with KS 1.2 is the
>loss of autoboot ability with a HD.
>

I believe that there is a problem in mixing the 1.3 printer.device with the 1.2
printer drivers.  I remember hearing (quite a long time ago) that this
particular mix-and-match combination would NOT work.  It seems that at least
one commercial program (DeluxePrint II) was released with this combo before
anyone even realized the problem.

>
>-- 
>Best regards, Dr. Peter Kittel  // E-Mail to  \\  Only my personal opinions... 
>Commodore Frankfurt, Germany  \X/ {uunet|pyramid|rutgers}!cbmvax!cbmger!peterk


----------------------------------------------------------------------------
Jay Ward --> jayward@eecs.cs.pdx.edu | if TrailBlazers > Opponents then      
                                     | 		TrailBlazerWins++
----------------------------------------------------------------------------