Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!sun-barr!olivea!samsung!dali.cs.montana.edu!ogicse!intelhf!agora!billsey
From: billsey@agora.uucp (Bill Seymour)
Newsgroups: comp.sys.amiga.hardware
Subject: Re: 1Meg Agnus fixes Was: Re: RAD: Problems (Won't Work)
Message-ID: <1990Dec5.215739.589@agora.uucp>
Date: 5 Dec 90 21:57:39 GMT
References: <5874@crash.cts.com> <1990Nov26.171840.24465@ericsson.se>
Organization: Open Communications Forum
Lines: 28

In article <1990Nov26.171840.24465@ericsson.se> etxtomp@eos.ericsson.se writes:
:
:A somewhat related question: After installing a 1Meg Agnus, should the
:program FastMemFirst still be in the Startup-Sequence? (I recall it's
:used to move C0.... memory to the end of the list of FASTmem, which is
:now not quite actual)
:
:I have a 2000 with an A2620 (with 2Meg) + the old Commodore 2meg memory
:board. How will I make sure that the programs first use 32bit memory, then
:normal FAST and last CHIP ram?
:
:ANYONE HAD A SUPRA WORDSYNC CONTROLLER WORK WITH AN A2620???
:
:Tommy Petersson

	There's no need for FastMemFirst if yoou have no $C00000 memory. The
32 bit memory starting at $200000 is used first without any extra massaging
on your part. The only things I know of that allocate from the top down are
recoverable ram disks and the like...
	I'm using a WordSync in my machine here at work with the 2620 and I
am having no problems. I used to use the Wordsync with my 2630 at home...
What kinds of troubles are you having?

-- 
     -Bill Seymour                                            billsey@agora
***** American People/Link Amiga Zone Hardware Specialist  NES*BILL *****
Bejed, Inc.       NES, Inc.        Northwest Amiga Group    At Home Sometimes
(503) 281-8153    (503) 246-9311   (503) 656-7393 BBS       (503) 640-0842