Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!wuarchive!zaphod.mps.ohio-state.edu!swrinde!ucsd!sdcc6!rblewitt
From: rblewitt@sdcc6.ucsd.edu (Richard Blewitt)
Newsgroups: comp.sys.amiga.hardware
Subject: Re: A3000/16
Message-ID: <14767@sdcc6.ucsd.edu>
Date: 6 Dec 90 20:13:15 GMT
References: <184e255a.ARN04328@adspdk.UUCP> <Dec.5.01.22.13.1990.10247@pilot.njin.net> <16318@cbmvax.commodore.com>
Organization: University of California, San Diego
Lines: 13

In article <16318@cbmvax.commodore.com> daveh@cbmvax.commodore.com (Dave Haynie) writes:
>run a 16MHz system's motherboard at 25MHz.  The on-board 68030 will of course
>still only work at 16MHz, so it must be shut off in any such setup.  With a
>25MHz A3000, you might have both Coprocessor board and on-board 68030 running
>at the same time at 25MHz.  That's the only thing you can't do on a 16MHz
>system than you can on a 25MHz system.

So it IS possible to have them both running at the same time!!  So
what are your plans for this great setup?  Come on Dave, throw us a
bone :)

                                             Rick Blewitt
                                             rblewitt@ucsd.edu