Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!uunet!orca.dsd.es.com!javelin.es.com!pashdown From: pashdown@javelin.es.com (Pete Ashdown) Newsgroups: comp.sys.amiga.hardware Subject: Sony KV-1330 goes into weird matrix mode after interlace. Message-ID: <1990Dec6.204815.6544@javelin.es.com> Date: 6 Dec 90 20:48:15 GMT Reply-To: pashdown%javelin@dsd.es.com Organization: Evans & Sutherland Computer Corp., Salt Lake City, Utah Lines: 17 I just got a used 2000 with a Sony KV-1330. Its got a weird problem with its video and I can't tell if its the monitor or the machine. When the interlace is turned on by a program, then turned off later, the graphics appear in a weird sort of "matrix" mode. Every other dot in a check-pattern is dimmer than normal. All I need to do to fix this is run setlace on, then off again. Then the screen is back to normal. Anyone else have this problem? Any fixes? Also, is there a way I can get the audio from the Amiga to run into the KV-1330? I tried the audio-in, but it didn't do anything. -- / (Rotate head 90 degrees for full effect) | BUNGEEEEEEEE! |---------------------------------------------------------------------->=