Path: utzoo!attcan!utgpu!news-server.csri.toronto.edu!rutgers!sun-barr!cs.utexas.edu!wuarchive!psuvax1!psuvm!cunyvm!g00qc
From: G00QC@CUNYVM (Jeannopoulos Alex)
Newsgroups: comp.sys.amiga.tech
Subject: Bridgeboard Problems !
Message-ID: <90336.132636G00QC@CUNYVM.BITNET>
Date: 2 Dec 90 18:26:36 GMT
Organization: City University of New York/ University Computer Center
Lines: 13


 Help out there, I have an Amiga 2000 with a GVP series II controller with
4 megs extra ram. I also have a A2088 Bridge Board. I am having problems with
running the software. First when I run off the bridgeboard disk I get a
Guru in the startup recoverable alert. 7FFFFFFA.0000000 But I installed the
software by going into my own cli and running BridgeInstall. I am able to run
PCPrefs some times and sometimes I get a recoverable Alert But The computer
is still frozen. I have been able to run pcwindows. Yet sometimes it runs some
times it doesnt. I have had a problem with my serial port which was damaged
thru a surge thru the phone lines during a lightning storm. The modem was also
damaged. But I recently had the serial port fixed. I know the Bridgeboard works
with the serial port but I dont know if maybe something else is wrong. Could so
meone please respond I really need to know and get it working.