Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!uunet!unsvax!uns-helios!alfter From: alfter@uns-helios.nevada.edu (SCOTT ALFTER) Newsgroups: comp.sys.apple2 Subject: Re: VT-100 Message-ID: <2408@unsvax.NEVADA.EDU> Date: 3 Dec 90 21:59:13 GMT References: Sender: news@unsvax.NEVADA.EDU Organization: University of Nevada System Computing Services Lines: 15 In article penguin@gnh-igloo.cts.com (Mark Steiger) writes: >I'm using ProTerm 2.2 and trying to communicate with a VT-100 vax. It says in >the lower right corner of the screen "Holding" and "More...". What comand keys >do I hvae to use to get it to "Unhold" and finish sending the info to my >computer?? I know on a computer I played with there at the Univ. it was a key >marked "clear". "Clear" on the GS keyboard don't work. :) You sure you're talking to a VAX? The messages you describe sound a lot like IBM VM/CMS. Try Control-Z to get things going again. ----------------------------------------------------------------------------- Scott Alfter _/_ / v \ Apple II: Internet: alfter@uns-helios.nevada.edu ( ( the power to be your best! GEnie: S.ALFTER \_^_/