Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!uwm.edu!ux1.cso.uiuc.edu!scotth From: scotth@ux1.cso.uiuc.edu (Scott Henderson) Newsgroups: comp.sys.apple2 Subject: Re: VT-100 Message-ID: <1990Dec4.003536.21690@ux1.cso.uiuc.edu> Date: 4 Dec 90 00:35:36 GMT References: <2408@unsvax.NEVADA.EDU> Organization: University of Illinois at Urbana Lines: 25 In article <2408@unsvax.NEVADA.EDU> alfter@uns-helios.nevada.edu (SCOTT ALFTER) writes: >In article penguin@gnh-igloo.cts.com (Mark Steiger) writes: >>I'm using ProTerm 2.2 and trying to communicate with a VT-100 vax. It says in >>the lower right corner of the screen "Holding" and "More...". What comand keys >>do I hvae to use to get it to "Unhold" and finish sending the info to my >>computer?? I know on a computer I played with there at the Univ. it was a key >>marked "clear". "Clear" on the GS keyboard don't work. :) > >You sure you're talking to a VAX? The messages you describe sound a >lot like IBM VM/CMS. Try Control-Z to get things going again. > >----------------------------------------------------------------------------- >Scott Alfter _/_ > / v \ Apple II: >Internet: alfter@uns-helios.nevada.edu ( ( the power to be your best! > GEnie: S.ALFTER \_^_/ Actually, try holding down the escape and period (".") key at the same time. That usually works for me when I use the yucky VM/CMS system. -- ============================================================================== = R. Scott Henderson = "Some people claim that there's a = = University of Illinois = woman to blame, but I know it's = = = my own damned fault." =