Path: utzoo!utgpu!news-server.csri.toronto.edu!rutgers!tut.cis.ohio-state.edu!ucbvax!CU.NIH.GOV!JDA
From: JDA@CU.NIH.GOV ("Doug Ashbrook")
Newsgroups: comp.sys.apple2
Subject: Re:  GSOS 5.0.3 and GScii incompatability?
Message-ID: <9012041319.AA10320@alw.nih.gov>
Date: 4 Dec 90 13:18:58 GMT
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: The Internet
Lines: 18

> Whenever I try to decode with GScii, I suddenly find that after
> I choose the BINSCIId file, my boot volume is unmounted and
> disappears! Has anyone else encountered similar shenanigans?
>
> Nick Sayer              | Disclaimer: "Don't try this at home, | RIP: Mel Blan
> mrapple@quack.sac.ca.us | kids. This should only be done by    |   1908-1989

Now that you mention it, I was never able to get GScii to work
either.  I would boot from my hard disk in slot 7 and select a file
on the hard disk to be processed, and GScii would keep polling my
3.5" disks connected to the smartport (slot 5).  I figured that maybe
the author did not have drives in different slots and had never
tested such a configuration.

====================================================================
J. Douglas Ashbrook                                   (301) 402-1248
INTERNET: JDA@CU.NIH.GOV                           BITNET: JDA@NIHCU
National Institutes of Health, Computer Center,   Bethesda, MD 20892