Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!samsung!sdd.hp.com!wuarchive!udel!princeton!cs!samadams!hundt From: hundt@samadams.princeton.edu (Tom Hundt) Newsgroups: comp.sys.mac.hardware Subject: Getting toolkit Date: 3 Dec 90 21:22:25 GMT References: <1990Nov12.165848.9984@ncsuvx.ncsu.edu> <1990Nov14.010342.836@cs.umn.edu> Sender: news@cs.Princeton.EDU Organization: Princeton University, NJ Lines: 17 |Also: |>You will also need a toolkit if you have a Plus or SE type machine |>I got help in installation, you may need it too. | |You don't need a toolkit, all you really need is a long handled torx wrench |(T-15), and if you have an internal HD in your SE a Phillips screwdriver |(probably #2). | |The wrench is hard hard hard to find, either borrow (best) or use a torx |bit with thin extension or have a section added to a normal torx wrench. Buy a toolkit (long torx wrench plus case opener plus grounding strap) for $10 from MacWarehouse (800/ALLMACS). -Tom Hundt, (still trying to hac my mac to above 512k, Word won't even run under 6.02! :-)