Path: utzoo!censor!geac!torsqnt!news-server.csri.toronto.edu!cs.utexas.edu!usc!zaphod.mps.ohio-state.edu!rpi!batcomputer!munnari.oz.au!labtam!cnw01!iann
From: iann@cnw01.storesys.coles.oz.au (Ian Nicholls)
Newsgroups: comp.sys.ncr
Subject: Cannot dial out on 600/3.00.01
Message-ID: <1139@cnw01.storesys.coles.oz.au>
Date: 29 Nov 90 23:10:24 GMT
Organization: Coles Myer Ltd., Melbourne, Australia
Lines: 83

I've just upgraded one of our Tower 32/600's to Unix release 3.0.01, and now
we can't dial out, using the supplied programs uucico and cu.

Has anyone had a similar problem?  What did you do to get around it?

The programs work on a 32/650, and the 2.00.01 cu program works under 3.00.01
(this is our current workaround; we still can't uucp).  The modem cable is
the standard straight-through one (1308-C030-0076), connected to a HPSIO
board.

The problem is that as soon as cu tries to read from the modem, it fails
with the message "lost line errno - 0", and tries the next line.  A capture
of such an attempt is below.


Devices: 
============================================================
ACU    tty04,M - 1200 hayes \D
Direct tty04,M - 1200 hayes
ACU    tty04,M - 2400 hayes \D
Direct tty04,M - 2400 hayes

Dialers:  (each of these has been tried)
============================================================
hayes	=,-,	"" \M\dAT\r\c OK\r \EATDT\T\r\c CONNECT \m\c
#hayes	=,-,	""	\M\d\dATDT\D\r\c
#hayes	""	""	\M\d\r\c\dAT\r\c	OK	ATDT\D\r\c	CONNECT \m
#hayes =,-, "" \dAT\r\c "" \EATDT\T\r\c CONNECT
#hayes "" "" AT\r\c OK ATDT\D\r\c CONNECT
#Orig: hayes	=,-,	"" \dAT\r\c OK\r \EATDT\T\r\c CONNECT
#2.01:hayes	""	""	\d\r\c\dAT\r\c	OK	ATDT\D\r\c	CONNECT
#hayes =,- "" \d\MAT\r\c OK ATDT\D\r\c CONNECT \m\c
#hayes	=,-,	"" \M\dAT\r\c OK\r \EATDT\T\r\c CONNECT \m\c

Command: cu -d 6801
============================================================
altconn called

Device Type ACU wanted
mlock tty04 succeeded
opening with O_NDELAY set
clear O_NDELAY
filelock: ok
fixline(5, 1200)
processdev: calling setdevcfg(cu, ACU)
gdial(hayes) called
expect: ("")
got it
sendthem ()
CLOCAL set
DELAY
<NO CR>AT^M)
expect: (OK^M)
lost line errno - 0
set interface UNIX
mlock tty04 succeeded
opening with O_NDELAY set
clear O_NDELAY
filelock: ok
fixline(5, 2400)
processdev: calling setdevcfg(cu, ACU)
gdial(hayes) called
expect: ("")
got it
sendthem ()
CLOCAL set
DELAY
<NO CR>AT^M)
expect: (OK^M)
lost line errno - 0
set interface UNIX
getto ret -1
Connect failed: CALLER SCRIPT FAILED

call cleanup(1)

call _mode(0)

-- 
"The honorable gentleman is a shiver, looking for a spine"
Ian Nicholls         Phone : +61 3 829 6088   Fax: +61 3 829 6886
Coles/Myer Ltd.      E-mail: iann@cnw01.storesys.coles.oz.au
L1 M11, PO Box 480, Glen Iris 3146, Australia