Path: utzoo!attcan!uunet!munnari.oz.au!labtam!cnw01!nigel
From: nigel@cnw01.storesys.coles.oz.au (Nigel Harwood)
Newsgroups: comp.sys.ncr
Subject: Re: How much internal memmory installed in a 32/400 ?
Summary: you can use show if you mcs it
Message-ID: <1140@cnw01.storesys.coles.oz.au>
Date: 2 Dec 90 04:36:56 GMT
References: <1909@ssbn.wlk.com>
Organization: Coles Myer Ltd., Melbourne, Australia
Lines: 21

In article <1909@ssbn.wlk.com>, tobbe@tessan.datessa.se (Torbj|rn B}}th) writes:
> I need to find out how much internal memory a NCR Tower 32/400 
> (SysV.2 01.03.00) has installed. I've tried to RTFM but I haven't found
> any usefull command. The 'show' program is not available, as it is on
> newer releases of the operating system. Any suggestions?

You *can* use the show command on 01.03.00, if you use the "mcs -d"
command on it first.  The mcs command will delete the comment section
which stops show working under 01.03.00.  I use it and have not found
it to cause any problems.

This in fact is what you do with most commands from 02.xx.xx which
you want to use on a 01.03.00 system.  I successfully use the
HDB cu for example, also with no problems.

Regards
-- 
<<<<<<<<<<<<<<<<<<<<<<<<<  Nigel Harwood  >>>>>>>>>>>>>>>>>>>>>>>>>>>
<< Post:  Coles Myer Ltd, PO Box 2000 Tooronga 3146, Australia     >>
<< Phone: +61 3 829 6090  E-mail: nigel@cnw01.storesys.coles.oz.au >>
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>