Path: utzoo!censor!geac!torsqnt!news-server.csri.toronto.edu!cs.utexas.edu!sdd.hp.com!zaphod.mps.ohio-state.edu!maverick.ksu.ksu.edu!kuhub.cc.ukans.edu!caen!sol.ctr.columbia.edu!hamblin.math.byu.edu!news From: smithw@hamblin.math.byu.edu (Dr. William V. Smith) Newsgroups: comp.sys.next Subject: Re: 030 Network Cube Dilemma Message-ID: <27209.275ac095@kuhub.cc.ukans.edu> Date: 30 Nov 90 19:05:58 GMT Organization: Brigham Young University Lines: 32 Distribution:world Message-ID: Lines: 17 In-Reply-To: cyliao@hardy.u.washington.edu's message of 30 Nov 90 19:36:35 GMT References: <86428@tut.cis.ohio-state.edu> <15274@cs.utexas.edu> <12036@milton.u.washington.edu> Sender: news@hamblin.math.byu.edu (Usenet News) cyliao@hardy.u.washington.edu (Chun-Yao Liao)writes: >In article > smithw@hamblin.math.byu.edu (Dr. William V. Smith) writes: >>To determine this, just pull of the back, and see if you have four >>mount points on the drive case. If yes, you can do it, if not, you > but hou about cables? there's only one powercord comes out from >powersuply which is used to be connected to the 40 MB swapdisk, and the >ribon cable of SCSI that is to be connected to only one device... how do I >arrange them so to have more SCSI deviced in my Cube? There are two power cords coming out of the power supply cage and the ribbon cable has two connectors on it. Want more? You'll have to chain them. -Bill- -- __________________Prof. William V. Smith____________________ EMail: smithw@hamblin.math.byu.edu or uunet!hamblin.math.byu.edu!smithw SMail: Math Dept. -- 314 TMCB; BYU; Provo, UT 84602 (USA) NeXTmail: smithw@mathnx.math.byu.edu Phone: +1 801 378 2061 FAX: +1 801 378 2800