Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!usc!wuarchive!zaphod.mps.ohio-state.edu!ub!uhura.cc.rochester.edu!ttak
From: ttak@uhura.cc.rochester.edu (Timothy Takahashi)
Newsgroups: comp.sys.tandy
Subject: Re: Tandy 1000TX 2MB memory board
Message-ID: <10771@ur-cc.UUCP>
Date: 4 Dec 90 00:00:19 GMT
References: <1990Dec3.165250.1330@vax5.cit.cornell.edu>
Distribution: comp
Organization: University of Rochester, Rochester NY
Lines: 15

In article <1990Dec3.165250.1330@vax5.cit.cornell.edu> up4@vax5.cit.cornell.edu writes:
>       I recently came across 2MB of free memory for my 1000TX.  Unfortunately
>I don't have a compatible card to put it on.  I found a XT 2MB card in the
>forrows of an old computer chassis at work, but of course, I can put at most an
>8" card in the TX's box.

I'm pretty sure that your 1000TX has an 80286 processor. Particularly for 
running applications like Windows 3.0 an extra 2Mb of EXTENDED memory would
be nice. However, the boards that were made for the Tandy 1000 series
(I had a PBJ) were only LIM EMS 3.2 EXPANDED Memory (Windows can use
LIM 4.0 memory in Real Mode - can't do much with LIM 3.2 memory).... So.
I'd have to say that you are out of luck  - (I upgraded to a 386 clone
last fall).

tim