Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!uunet!virtech!cpcahil
From: cpcahil@virtech.uucp (Conor P. Cahill)
Newsgroups: comp.unix.sysv386
Subject: Re: FAS install fails: kconfig
Message-ID: <1990Dec04.143442.9165@virtech.uucp>
Date: 4 Dec 90 14:34:42 GMT
References: <150@xyzoom.UUCP>
Reply-To: cpcahil@virtech.UUCP (Conor P. Cahill)
Distribution: na
Organization: Virtual Technologies Inc., Sterling VA
Lines: 19

In article <150@xyzoom.UUCP> rob@xyzoom.info.com (Rob Lingelbach) writes:
>
>I'm trying to install FAS 2.07 to allow use of the AST 4 port card, and
>the kernel build is failing with the following message (ISC 2.2):
>
>LINE:fas	Y	4	7	1	9	2a0	2bf
                                       ^^^^
The problem is associated with field 5.  This field contains a 1 (as in 
your case) when each sdevice entry requires a separate interrupt (i.e. does
not share the interrupts).

If FAS2.07 does in fact share interrupts, then you need to set this field
to a 2 or 3.  See sdevice(4) for more info.


-- 
Conor P. Cahill            (703)430-9247        Virtual Technologies, Inc.,
uunet!virtech!cpcahil                           46030 Manekin Plaza, Suite 160
                                                Sterling, VA 22170