Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!wuarchive!usc!apple!bionet!hayes.ims.alaska.edu!acad3.alaska.edu!ftpam1
From: ftpam1@acad3.alaska.edu (MUNTS PHILLIP A)
Newsgroups: sci.electronics
Subject: Re: Single-chip EPROM microcomputer programming adaptors
Keywords: EPROM microcomputer programming
Message-ID: <1990Dec3.054755.5991@hayes.ims.alaska.edu>
Date: 3 Dec 90 05:47:55 GMT
References: <47676@sequent.UUCP>
Sender: usenet@hayes.ims.alaska.edu (J Random USENET)
Reply-To: ftpam1@acad3.alaska.edu
Followup-To: sci.electronics
Organization: University of Alaska Fairbanks
Lines: 21
News-Software: VAX/VMS VNEWS 1.3-4
Nntp-Posting-Host: acad3.fai.alaska.edu

In article <47676@sequent.UUCP>, rjk@sequent.uucp (Robert Kelley) writes...
>Ok, now I've got my GTEK 7228 EPROM programmer running, and I'm
>able to program many common EPROMS.  I suppose I can also program
>single-chip EPROM microcomputers like the 8748, 8749, 8751, etc.
>if I can figure out how to make my EPROM programmer think it's
>programming a regular EPROM.  Does anyone happen to know how to
>build EPROM programming adaptors, or know of inexpensive commercial
>sources of same?
> 
>Robert Kelley
>rjk@sequent.com

Logic Devices (they used to advertise in Byte) makes them.

I once wired up one for the 8751; you could program only selected individual
devices and you could never read back what was programmed.  The unit from
Logical Devices I used later was MUCH more convenient.

Philip Munts N7AHL
NRA Extremist, etc.
University of Alaska, Fairbanks


Brought to you by Super Global Mega Corp .com