Newsgroups: comp.archives Path: utzoo!utgpu!news-server.csri.toronto.edu!math.lsa.umich.edu!caen!ox.com!emv From: wade@speedy.cs.utk.edu (reed wade) Subject: [xpert] Re: X11R4 on RS6000/AIX Message-ID: <1990Dec8.033428.28614@ox.com> Followup-To: comp.windows.x Keywords: AIX IBM RS6000 Sender: emv@ox.com (Edward Vielmetti) Reply-To: wade@cs.utk.edu Organization: Univ. of Tenn. Computer Science, Knoxville References: <2352@bnlux0.bnl.gov> <366@inetg1.arco.com> <1990Dec7.173052.29626@cs.utk.edu> Date: Sat, 8 Dec 90 03:34:28 GMT Approved: emv@ox.com (Edward Vielmetti) X-Original-Newsgroups: comp.windows.x Archive-name: x11/servers/rs6000/1990-12-07 Archive: cs.utk.edu:/pub/ibm_rs6000/R4xterm.patch [128.169.201.1] Original-posting-by: wade@speedy.cs.utk.edu (reed wade) Original-subject: Re: X11R4 on RS6000/AIX Reposted-by: emv@ox.com (Edward Vielmetti) In article <366@inetg1.arco.com>, phil@inetg1.Arco.Com (Phil Meyer) writes: |> In article <2352@bnlux0.bnl.gov>, benu@max.bnl.gov (David Hassel) writes: |> > |> > Has anyone ported X11R4 to an IBM RS6000. I have just FTPed the |> > source and patches from expo and make fails. |> |> The 6000 that I played with for a couple of days, had the X11R4 >distribution on the disk under /usr/Examples (I think). I did a make >World on it just for grins, and it completed in 25 minutes! I no longer >have access to that machine so I can't be more specific. |> |> -- |> +=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-+ |> | Phil Meyer phil@arco.com Work:(214) 754-6805 | |> +=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-+ /usr/Examples isn't on any of our machines. You can get a few helpful things from ~ftp/pub/ibm_rs6000 on cs.utk.edu. I would first recommend installed the xlc.cfg from there, that make cc act a little more bsdish. I haven't had much trouble compiling the R4 libraries or clients. Xterm, however will not work without certain changes. See ~ftp/pub/ibm_rs6000/R4xterm.patch -reed wade@cs.utk.edu