Path: utzoo!attcan!telly!lethe!torsqnt!news-server.csri.toronto.edu!cs.utexas.edu!wuarchive!zaphod.mps.ohio-state.edu!rpi!uupsi!sunic!lth.se!newsuser
From: e85rw@efd.lth.se (Ricard Wolf)
Newsgroups: comp.music
Subject: Re: Setting serial port's baud rate for midi on the Amiga
Keywords: midi baud amiga serial
Message-ID: <1990Dec7.073842.10414@lth.se>
Date: 7 Dec 90 07:38:42 GMT
References: <1990Dec3.034829.11333@watdragon.waterloo.edu> <1990Dec4.074947.23509@lth.se> <58485@becker.UUCP>
Sender: newsuser@lth.se (LTH network news server)
Reply-To: e85rw@efd.lth.se (Ricard Wolf)
Organization: Lund Institute of Technology, Sweden
Lines: 18

In article <58485@becker.UUCP> bdb@becker.UUCP (Bruce D. Becker) writes:
...
>
>	You can't do it from Basic, the performance
>	requirements are way outside of what it
>	can do. Also you need to set some serial
>	device parameters of which only a small
>	subset can be manipulated from Basic.
>
Of course Basic would be too slow to read data, but what he wanted to do was 
send data only.
-- 
Ricard Wolf

+--------------------------+-------------------------------------+
| Ricard Wolf              | Lund Institute of Technology        |
| email: e85rw@efd.lth.se  | If you can't buy 'em - build 'em !! |
+--------------------------+-------------------------------------+