Path: utzoo!censor!geac!torsqnt!news-server.csri.toronto.edu!cs.utexas.edu!samsung!usc!ucsd!ucbvax!bloom-beacon!eru!hagbard!sunic!ericom!eos.ericsson.se!etxtomp
From: etxtomp@eos.ericsson.se (Tommy Petersson)
Newsgroups: comp.sys.amiga.hardware
Subject: Re: 1Meg Agnus fixes Was: Re: RAD: Problems (Won't Work)
Message-ID: <1990Dec6.185659.12127@ericsson.se>
Date: 6 Dec 90 18:56:59 GMT
References: <5874@crash.cts.com> <1990Nov26.171840.24465@ericsson.se> <1990Dec5.215739.589@agora.uucp>
Sender: news@ericsson.se
Reply-To: etxtomp@eos.ericsson.se
Organization: Ericsson Telecom AB
Lines: 37

In article <1990Dec5.215739.589@agora.uucp> billsey@agora.uucp (Bill Seymour) writes:
>In article <1990Nov26.171840.24465@ericsson.se> etxtomp@eos.ericsson.se writes:
>:
>:A somewhat related question: After installing a 1Meg Agnus, should the
>:program FastMemFirst still be in the Startup-Sequence? (I recall it's
>:used to move C0.... memory to the end of the list of FASTmem, which is
>:now not quite actual)
>:
>:I have a 2000 with an A2620 (with 2Meg) + the old Commodore 2meg memory
>:board. How will I make sure that the programs first use 32bit memory, then
>:normal FAST and last CHIP ram?
>:
>:ANYONE HAD A SUPRA WORDSYNC CONTROLLER WORK WITH AN A2620???
>:
>:Tommy Petersson
>
>	There's no need for FastMemFirst if yoou have no $C00000 memory. The
>32 bit memory starting at $200000 is used first without any extra massaging
>on your part. The only things I know of that allocate from the top down are
>recoverable ram disks and the like...
>	I'm using a WordSync in my machine here at work with the 2620 and I
>am having no problems. I used to use the Wordsync with my 2630 at home...
>What kinds of troubles are you having?
>
>-- 
>     -Bill Seymour                                            billsey@agora
>***** American People/Link Amiga Zone Hardware Specialist  NES*BILL *****
>Bejed, Inc.       NES, Inc.        Northwest Amiga Group    At Home Sometimes
>(503) 281-8153    (503) 246-9311   (503) 656-7393 BBS       (503) 640-0842


The machine works OK in 68000 mode, hangs in 68020 mode.
I finally got into contact with Supra US, and they said it was a
problem with an old version of their aotoboot ROM and a PAL. They
should send new chips, I hope they do.

Tommy Petersson