Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!usc!wuarchive!julius.cs.uiuc.edu!news.cs.indiana.edu!rutgers!ucsd!ucbvax!gnh-starport.cts.com!kimbrennan
From: kimbrennan@gnh-starport.cts.com (Kim Brennan)
Newsgroups: comp.sys.apple2
Subject: Re: PostScript to disk?
Message-ID: <m0ihxtL-00008TC@jartel.info.com>
Date: 8 Dec 90 06:58:46 GMT
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: The Internet
Lines: 22
X-Unparsable-Date: Fri Dec  7 90 at 20:05:18 (EST)

Mike, to print to disk using the Laserwriter driver you will need to RENAME the
driver (I rename mine after the version number) so that LASERWRITER becomes
LASERWRITER3.1 (the latest version) in the DRIVERS folder of your boot disk.
Now you will need to reboot and then select that driver (Laserwriter3.1) from
the DIRECT CONNECT CDEV. Once all that is done, load your document and set up
the page as you desire.
    Now, to print to disk HOLD DOWN the OPEN APPLE F keys while simultaneously
CLICKING on OKAY in the PRINT dialog. This will put a text file (called
PostscriptGSxx...xx being a two digit number) in your DRIVERS folder. This file
can then be sent to a Laserwriter (or other Postscript capable printer)
    On the Mac side you will need the Font downloader program to send the text
file to the printer. Send the file (not a font).
    Hope this helps you.
INET: /\_/\  kimbrennan@gnh-starport.cts.com
     / o o \ America Online: KimBrennan
     (  v  ) ______
     /// \\\       \\
      (          / /\\
      | || |\___/ /  ))
     /// ///   ///   ((
                     ))
                     ~