Xref: utzoo comp.sys.atari.st:33093 comp.sys.atari.st.tech:858
Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!swrinde!zaphod.mps.ohio-state.edu!rpi!uupsi!sunic!news.funet.fi!funic!santra!saha.hut.fi!s37837k
From: s37837k@saha.hut.fi (Jari Lehto)
Newsgroups: comp.sys.atari.st,comp.sys.atari.st.tech
Subject: Re: Nec 1401PC3A Multisync, will it work?
Message-ID: <1990Dec8.173320.15109@santra.uucp>
Date: 8 Dec 90 17:33:20 GMT
References: <1990Nov16.220355.19927@lonex.radc.af.mil> <1990Nov21.030706.6347@rbdc>
Sender: news@santra.uucp (Cnews - USENET news system)
Reply-To: s37837k@saha.hut.fi (Jari Lehto)
Organization: Helsinki University of Technology, FINLAND
Lines: 12

I'm sure, that every multisync monitor can work with ST.
I have the NEC 3D, and I see no reason why xD (x>3) wouldn't work.
About 2A, I have a cable to connect ST to NEC 2A, I don't need it.
It is made by LINDY, I have bought it from Germany. But it is quite
easy to make a cable for a monitor, IF you have the pin assignments
(can be found from manuals), IF you can get the proper connectors
(ST's 13-pin round is a problem, cut from old cable).

	*** jartsu@otax.hut.fi / s37837k@saha.hut.fi ***
	*** 		Jari Lehto		     ***

	*** Jari Lehto, jartsu@otax.hut.fi, s37837k@saha.hut.fi ***