Path: utzoo!censor!geac!torsqnt!news-server.csri.toronto.edu!cs.utexas.edu!usc!zaphod.mps.ohio-state.edu!sol.ctr.columbia.edu!src.honeywell.com!msi.umn.edu!noc.MR.NET!gacvx2.gac.edu!hhdist
From: TDSTRONG%MTUS5.BITNET@CUNYVM.CUNY.EDU (Tim Strong)
Newsgroups: comp.sys.handhelds
Subject: HP48<-->Apple //c file transfers
Message-ID: <2839229E00001083@gacvx2.gac.edu>
Date: 7 Dec 90 14:36:11 GMT
Lines: 20
To: handhelds@gac.edu
Return-path: <@CUNYVM.CUNY.EDU:TDSTRONG@MTUS5.BITNET>
To: handhelds@gac.edu

Well its take months of doing but I finally have my HP48 talking
to my Apple //c.  Only one problem remains.  After a file transfer in
which everything else has gone fine (I can check the file and see that it
matches what is on my 48) the kermit on my Apple gives me the message:

TRANSFER FAILED...
COULD NOT RECEIVE HEADER

Or something very similiar.  The file seems to transfer fine and it all
seems to be there on the Apple end.  I'm just curious about the error
message.

Incidentally I am using Kermit v. 3.85 for the Apple II.

===============================================================================
  ___
  :__)  _   _:  _   _       Tim Strong  <TDSTRONG@MTUS5.BITNET>
  :  \ (_: (_: (_: :         Michigan Technological University

===============================================================================