Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!swrinde!zaphod.mps.ohio-state.edu!caen!ox.com!emv
From: blbates@AERO4.LARC.NASA.GOV ("Brent L. Bates AAD/TAB MS361 x42854")
Newsgroups: comp.archives
Subject: [sgi] Re: PLOT3D *.ras conversion program
Message-ID: <1990Dec13.020420.22981@ox.com>
Date: 13 Dec 90 02:04:20 GMT
References: <9012061502.AA01409@aero4.larc.nasa.gov>
Sender: emv@ox.com (Edward Vielmetti)
Reply-To: blbates@AERO4.LARC.NASA.GOV ("Brent L. Bates AAD/TAB MS361 x42854")
Followup-To: comp.sys.sgi
Organization: The Internet
Lines: 22
Approved: emv@ox.com (Edward Vielmetti)
X-Original-Newsgroups: comp.sys.sgi

Archive-name: graphics/pixutils/arcgraph-to-ps/1990-12-06
Archive: vgr.brl.mil:/pub/change.tar.Z [192.5.23.6]
Original-posting-by: blbates@AERO4.LARC.NASA.GOV ("Brent L. Bates AAD/TAB MS361 x42854")
Original-subject: Re: PLOT3D *.ras conversion program
Reposted-by: emv@ox.com (Edward Vielmetti)


    I put a copy of the conversion program I wrote to change ARCGraph
'.ras' files (PLOT3D) to Tektronix 4693D and PostScript b/w and grayscale
in the info-iris archives.  Anonymous ftp to vgr.brl.mil, cd pub, make
sure you are in binary mode and get the file change.tar.Z  Uncompress the
file, tar xvof change.tar.  This is the latest C version.  It uses the Ames
ARCGraph library to save images, so if you want to resave images you will
need that library.  If not, you can just eliminate that section.
--

	Brent L. Bates
	NASA-Langley Research Center
	M.S. 361
	Hampton, Virginia  23665-5225
	(804) 864-2854
	E-mail: blbates@aero4.larc.nasa.gov or blbates@aero8.larc.nasa.gov