Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!uwm.edu!uwvax!ub.d.umn.edu!cs.umn.edu!quest!orbit!pnet51!pj
From: pj@pnet51.orb.mn.org (Paul Jacoby)
Newsgroups: comp.dcom.modems
Subject: Telebit T2500 hangs as answering modem with V.32/V.42bis connect
Message-ID: <3628@orbit.cts.com>
Date: 14 Dec 90 18:45:06 GMT
Sender: root@orbit.cts.com
Organization: People-Net [pnet51], Minneapolis, MN.
Lines: 22


  I have been experiencing a problem with a local system I call. The system is
running a Telebit T2500, and is setup for V.32 connects.  Calling with my
shiny new Practical Peripherals 9600SA modem (which, incidentally, works
great when properly configured), I can make a V.32/V.42bis connection with no
problems.
  After that, I can generally do my thing for a number of minutes. Then, with
no real warning, the T2500 will lock up completely. I cannot even drop the
connection by popping back to command mode and typing ATh.  I must cycle power
on my end to clear the connections.
  
  The sysop of the system says has encountered the same problems dialing into
his own board from his other V.32 modem (MultiTech).  Is this a problem that
anyone else has seen? 

  In the meantime, MNP connections are working just fine.  There appears to be
something flaky with V.32/V.42bis connects.
-----------------------------------------------------------------------------.
| UUCP: {crash tcnet}!orbit!pnet51!pj            | RTFD = Read The Silly Doc! |
| INET: pj@pnet51.orb.mn.org                     |                            |
`-----------------------------------------------------------------------------'