Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!samsung!umich!ox.com!mudos!mju From: mju@mudos.ann-arbor.mi.us (Marc Unangst) Newsgroups: comp.dcom.modems Subject: Re: Telebit <==> Everex Connectionm problem Keywords: n Message-ID: Date: 15 Dec 90 17:10:34 GMT References: <16@ghost.UUCP> Organization: The Programmers' Pit Stop, +1 313 665 2832 Lines: 18 kianusch@ghost.UUCP (Kianusch Sayah-Karadji) writes: > I'm running a TELEBIT 2500, on my site, workes great... > > The only problem is that I have a hard time to get a > Everex to dial up to my machine at 2400 (or 1200) baud. This is a common problem with the "cheaper" 2400bps modems. The calling modem hears the V.32 answer tones, mistakes them for V.22bis answer tones (2400bps), tries to establish a connection, and then fails. The solution is to add several commas (I've found that 5-6 work well for local calls, but you'll have to experiment) after the phone number, to force the modem to wait out the V.32 tones and respond to the V.22bis tones. -- Marc Unangst | mju@mudos.ann-arbor.mi.us | "Bus error: passengers dumped" ..!umich!leebai!mudos!mju |