Path: utzoo!censor!geac!torsqnt!news-server.csri.toronto.edu!cs.utexas.edu!usc!apple!agate!ucbvax!NKUVAX.BITNET!MUNDAY From: MUNDAY@NKUVAX.BITNET (David Munday) Newsgroups: comp.mail.uucp Subject: Help: Using FSUUCP Message-ID: Date: 7 Dec 90 21:23:00 GMT Sender: daemon@ucbvax.BERKELEY.EDU Lines: 110 I've been trying to configure FSUUCP to log into a local UNIX system for mail and news and I've been having problems. Can anyone using FSUUCP see what's wrong here? I've included a copy of my l.sys file, a transcript of a session where I called the system with an ordinary communications program and giving my UUCP login ID, and a transcript/description of FSUUCP's output. passwords and phone numbers have been changed ----------begin l.sys------------------------------------------------------- cinnet Any Hayes 2400 ATDT5551212 "" \d\d ogin: umunday / WORD: pickle ----------end l.sys--------------------------------------------------------- this is all one line the / here indecates concat the next line. ---------begin transcript of dialin with uucp login-------------------------- Welcome to the Cincinnati Network's Publix Access Unix ISC 386/ix To register as a new user, use the "newacct" name, and "new user" when asked. System name: cniysc login: umunday Password: UNIX System V/386 Release 3.2 cniysc Copyright (C) 1984, 1986, 1987, 1988 AT&T Copyright (C) 1987, 1988 Microsoft Corp. All Rights Reserved Shere=cinnet -------end transcript of dialin to cinnet with uucp login--------------------- -------begin screen capture of FSUUCP just before things go bad--------------- Got that! Connect! Line Settle... Expecting: """" Sending: "\d\d" Expecting: "ogin:" Got:goon?1x8|??0PB?0DC}yq}???????????????#?r?/????????????j????rc r Welcome to the Cincinnati Network's Publix Access Unix ISC 386/ix To register as a new user, use the "newacct" name, and "new user" when asked. System name: cniysc login: Got that! Sending: "umunday" Expecting: "WORD:" Got: \PASSWORD: Got that! Sending: "pickle" Calling uucico.exe -scinnet -x9 ---------end screen capture------------------------------------------------- all that stuff preceding the Welcome message as crud from before the \d\d causes the other modem to auto baud. this is followed by the UUCICO screen which sits there for a while then the screen blanks and I get the message -----------begin------------------------------------------------------------ FSUUCP Version 1.1 Release 5: Could not connect to cinnet. EXIT STATUS: STARTUP: rmsg timeout (M1) -----------end-------------------------------------------------------------- then the screen blanks again and I get -----------begin----------------------------------------------------------- system "cinnet" is not in the l.sys file -----------end------------------------------------------------------------- cinnet is in the l.sys file as you can see, and I know callout can find l.sys since it's finding the phone number there. Any Ideas? also the -p and - options to callout do not tee the debug info as they are expected to. I have not yet registered this product yet as I have yet to see it work! Any help would be apreciated. ------------------------------------------------------------------------- Dave Munday | Bitnet : munday@nkuvax AT&T 606-781-2423 Fool on the Hill | INTERNET : munday@nkuvax.bitnet Northern Kentucky U. | UUCP : ...psuvax1!nkuvax.bitnet!munday | USmail : 20 Chalfonte Pl, Ft Thomas, Ky 41075 "Independence is for the very few; it is a privilege of the strong. And whoever attempts it even with the best right but without inner constraint proves that he is probably not only strong, but also daring to the point of recklessness.... Supposing one like that comes to greif, this happens so far from the comprehension of men that they neither feel it nor sympathize." - Friedrich Nietzsche, Beyond Good and Evil, 29.