Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!usc!samsung!sol.ctr.columbia.edu!emory!gatech!prism!jm59
From: jm59@prism.gatech.EDU (MILLS,JOHN M.)
Newsgroups: comp.os.cpm
Subject: Re: uniform and 8 inch cpm formats on AT controllers
Message-ID: <18617@hydra.gatech.EDU>
Date: 13 Dec 90 13:36:40 GMT
References: <1990Dec12.101626.16284@techbook.com>
Distribution: na
Organization: Georgia Institute of Technology
Lines: 18

I have an SD-Systems setup, using their Versafloppy III (?) from back
before the flood.  This controller has a connector for 5 in. drives,
but I've been unsuccessful getting it to run an AT-style (dshd) drive.
Any suggestions welcome: is the connector the same for the hd drive as
for the dsdd model? Termination of cable req'd?  Jumpers somewhere?
Symptoms are that my FORMAT selects the drive and steps across it
(trying various formats originally intended for 5 in. drives), then
doesn't find the format when I look for the directory, use STAT, or
run DTYPE (a drive checking utility which looks at formats).  Any
suggestions welcome.  BTW, the card set originally came from JADE.
It has worked impeccably, except I had apparently a defective mapping
PROM, for which JADE sold me a replacement.  Thanks.  :=).

-- 
MILLS,JOHN M.
Georgia Institute of Technology, Atlanta Georgia, 30332
uucp:	  ...!{decvax,hplabs,ncar,purdue,rutgers}!gatech!prism!jm59
Internet: jm59@prism.gatech.edu