Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!wuarchive!uunet!bu.edu!purdue!haven!mimsy!nmrdc1!minixug!waltje From: waltje@minixug.mugnet.org (Fred van Kempen) Newsgroups: comp.os.minix Subject: Re: (none) Message-ID: <238@minixug.mugnet.org> Date: 12 Dec 90 15:12:43 GMT References: <38340@nigel.ee.udel.edu> Organization: MINIX User Group Holland (NLMUG) - MUGNET - Lines: 31 In article <38340@nigel.ee.udel.edu>, mmdf@ee.udel.edu (The Mailer) wrote: > Hello again, > I have been playing with Minix for about 2 weeks now, I have it > running on a roomates PC. I am trying to get it to run on my PC. I > send a note to this list about 3 weeks ago and got some good suggestions, > but to no avail. I have an RLL drive and controller, and need the > wini.c diffs (or entire program) for version 1.2 of Minix for an RLL > drive. I have a Seagate ST238R drive and ST11 controller. Any help > would be greatly appreciated. I have already tried changing the > NR_SECTORS, num_cylinders and several other attempts. Minix crashes > in the wini.c program, after it resets the drive and tries to read from > it, I forget the exact name of the function but it ends with '..rdwt()' > or something, it is at home and I am at work. Any help would be apreciated. The ST-11 has a couple of bugs in its ROM-BIOS (version 1.5) which causes MINIX to go bananas. I have MINIX (1.5) running on an XT with the same disk setup as you have, but with a modified wini-driver. Since various patch sets exist, I suggest you look in the archive at plains.nodak.edu for them. Otherwise, I can send (or post) the 1.5 wini driver for the ST11 controller... Regards, Fred. +-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-+ | MINIX User Group Holland UUCP: waltje@minixug.mugnet.org | | c/o Fred van Kempen, or: waltje%minixug@plains.nodak.edu | | Hoefbladhof 27 | | 2215 DV VOORHOUT "Love is - what you want it to be. | | The Netherlands Alannah Myles" | +-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-+