Newsgroups: comp.os.msdos.apps
Path: utzoo!telly!problem!skypod!scott
From: scott@skypod.uucp (Scott Campbell)
Subject: Re: Run a PC from a UNIX machine (Was: Re: CTTY, substitute.)
Message-ID: <1990Dec8.202326.6490@skypod.uucp>
Keywords: ctty remote UNIX
Organization: Skypod Communications Inc., Toronto, Ontario
References: <1990Dec6.172029.23955@mp.cs.niu.edu>
Date: Sat, 8 Dec 90 20:23:26 GMT

I have an AT&T 3B2/400 running UNIX System V and an AT clone running DOS.
I am trying to set it up so that you can run DOS remotely from the UNIX
box or UNIX remotely from the DOS box.  I have serial line running from
contty on the UNIX end to COM1: on the DOS end.  

I can dial out to UNIX with procomm no problem.  The trouble is dialing
into DOS.  I have Remote 2 and it looks like it *should* work but all
I get is all kinds of garbage.  Is there a better way?

Would using MODE under DOS to make the COM1: the console work? (anyone 
know the switches needed?)

Any advice would be appreciated.  Also anyone with success in getting UUPC
running (mail for DOS), please e-mail to me... 

thanx in advance

scott

-- 
Scott J.M. Campbell                                       scott@skypod.uucp
Skypod Communications Inc.                                   (416) 961-3847
57 Charles St. West, #1310              nyama!skypod!scott@epas.utoronto.ca
Toronto, Ontario           {scocan|becker|problem|torag|nyama}!skypod!scott