Xref: utzoo comp.unix.ultrix:5564 comp.periphs.scsi:1522 comp.sys.dec:4705
Path: utzoo!censor!geac!torsqnt!news-server.csri.toronto.edu!cs.utexas.edu!wuarchive!usc!elroy.jpl.nasa.gov!ncar!boulder!uswat!csn!news!grunwald
From: grunwald@foobar.colorado.edu (Dirk Grunwald)
Newsgroups: comp.unix.ultrix,comp.periphs.scsi,comp.sys.dec
Subject: re: Fuji 2266  drive
Message-ID: <1990Dec11.005624.4787@csn.org>
Date: 11 Dec 90 00:56:24 GMT
Sender: news@csn.org
Reply-To: grunwald@foobar.colorado.edu
Distribution: comp
Organization: University of Colorado at Boulder
Lines: 18
Nntp-Posting-Host: foobar.colorado.edu


How to get a FUJI 2266 drive to work on a DECstation:

Switch Bank CHN2:
	- open switch 1-2	(make it be SCSI-1/CCS)
	- open switch 11-12	(turn parity off)
	- open switch 15-16	(let host initiate SCSI synch mode)

For some hosts, you may need to also disable the readahead cache
(CHN9), but it seems to work on the DECstation. Bulk transfers (using
dd & 32K blocks) are 1.2Mb/s. The Wren V gets about the same, maybe a
little less. The Fuji has 14.5ms seek time.


Thanks go to Tom Eastman of r^2 systems, the vendor.

Dirk Grunwald -- Univ. of Colorado at Boulder	(grunwald@foobar.colorado.edu)
						(grunwald@boulder.colorado.edu)