Xref: utzoo comp.misc:10882 comp.sources.wanted:14465
Path: utzoo!utgpu!watserv1!watmath!att!pacbell.com!ucsd!sdd.hp.com!wuarchive!uunet!mcsun!ukc!axion!tharr!sweh
From: sweh@tharr.UUCP (Stephen Harris)
Newsgroups: comp.misc,comp.sources.wanted
Subject: Programming VT420
Message-ID: <1494@tharr.UUCP>
Date: 10 Dec 90 15:08:17 GMT
Reply-To: sweh@tharr.UUCP (Stephen Harris)
Followup-To: comp.misc
Organization: Public access to Usenet in the UK
Lines: 22

In fact, programming the Function keys on any VT series machine (even a VT100
if possible).
The keys I want to program are the ones marked F1->F14,HELP,DO,f17->F20 on
the top row (not the numeric/application keypad).
The 420 manual says use DCS Pc ; Pl | Ky1/Sy1 ST
where Ky1 is from a table and St1 is a list of Hex codes.
I have tried echoing
	<ESC>P0;1|29/40<ESC>\
but this doesn't program to DO key as I expected.

I have sent off for the 420 programmers manual but need the answer to this
question urgently.
Can anyone help?

		Thanks

-- 
    			     Stephen Harris
Disclaimer: me have an opinion?     | Email: ..!ukc!axion!tharr!sweh
            What an idea!	    |        sweh%tharr.uucp@uk.co.bt.axion
Wanted: humour transplant           |        tharr!sweh@uk.ac.ukc 
     <-- tharr *free* public access to Usenet in the UK 0234 261804 -->