Xref: utzoo comp.sys.amiga:74158 comp.sys.amiga.tech:16904 Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!hellgate.utah.edu!caen!uflorida!beach.cis.ufl.edu!pm0 From: pm0@beach.cis.ufl.edu (Patrick Martin) Newsgroups: comp.sys.amiga,comp.sys.amiga.tech Subject: Re: Dnet Question Message-ID: <25862@uflorida.cis.ufl.EDU> Date: 11 Dec 90 19:27:47 GMT References: <90345.101107JFS10@psuvm.psu.edu> Sender: news@uflorida.cis.ufl.EDU Reply-To: pm0@beach.cis.ufl.edu () Organization: UF CIS Department Lines: 28 In article <90345.101107JFS10@psuvm.psu.edu> JFS10@psuvm.psu.edu (Jonathan Swaby) writes: >I am having problems running Dnet on a SPARCserver 1+ running SUNOS4.1. The >code compiled with no problems, but things just do not seem to work. Fterm >operates correctly, but getfiles and putfiles do not seem to work. I have >been able to get Dnet to run correctly on another SUN machine just by >following the instructions that came with dnet. I have notice when I run >it on the one machine it spawns roughly 3 subprocesses. On the machine >that is giving me problems it spawns perphaps 1 subprocess. I know the >information I have given is vague, so if you there is more information I >can give I am more than willing. I am using an Amiga 1000 with a 2400baud >modem to connect. > >Jonathan Swaby jfs10@psuvm.psu.edu > jswaby@psusun01.psu.edu > swaby@zelinski.psu.edu Did you add the drectory where getfiles and putfiles reside to your path? Sometimes I lose the path for no apparent reason so I have to type work:dnet/bin/getfiles -d -c to get it to work. One other thing, if my memory serves me correctly, you also have to have a directory which is not one of your subdirectories which has dnet.servers and dnet.config in it. Hope this helped somewhat, it has been awhile since I set dnet up on mys system. Pat