Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!usc!apple!amdahl!JUTS!rmm20 From: rmm20@ccc.amdahl.com (Robert Mitchell) Newsgroups: comp.sys.amiga Subject: Re: Another problem with A2320 in overscan area Message-ID: <00gj02a.04B501@JUTS.ccc.amdahl.com> Date: 15 Dec 90 17:14:33 GMT References: <90345.212323CJC105@psuvm.psu.edu> <1727@syteke.be> Reply-To: rmm20@JUTS.ccc.amdahl.com (PUT YOUR NAME HERE) Organization: Amdahl Corporation, Sunnyvale CA Lines: 23 In article <1727@syteke.be> jim@syteke.be (Jim Sanchez) writes: >I wish I could adjust my size control sufficiently to fill the >physical screen with a raster. Does anyone know if a "Redmond Cable" >is required with the NEC 3D and the A2320. I know I had to get a >buffered cable for the NEC to use it with the stock 2000. >-- >Jim Sanchez | jim@syteke.be (PREFERRED) >Hughes LAN Systems | OR uunet!mcsun!ub4b!syteke!jim >Brussels Belgium | OR jim@hls.com >-- >Jim Sanchez | jim@syteke.be (PREFERRED) >Hughes LAN Systems | OR uunet!mcsun!ub4b!syteke!jim >Brussels Belgium | OR jim@hls.com Just a note: I am looking at a NEC 3D screen as I write this. It is on a "stock" 2000. All I did was wire up a liitle cross-wire adapter to go from the NEC to the DB23 on the 2000. No logic; just wires. Works great.-- UUCP: rmm20@juts.ccc.amdahl.com DDD: 408-746-8491 USPS: Amdahl Corp. M/S 205, 1250 E. Arques Av, Sunnyvale, CA 94086 BIX: bobmitchell