Path: utzoo!utgpu!cunews!micor!latour!atronx!rwm
From: rwm@atronx.OCUnix.On.Ca (Russell McOrmond)
Newsgroups: comp.sys.amiga.tech
Subject: Re: A3000 boot colours
Message-ID: <55544.660953763@atronx.OCUnix.On.Ca>
Date: Tue Dec 11 16:16:03 1990
Followup-To: comp.sys.amiga.hardware
In-Reply-To: daveh@cbmvax.commodore.com (Dave Haynie)

In a message posted on 10 Dec 90 18:44:39 GMT,
daveh@cbmvax.commodore.com (Dave Haynie) wrote:
DH>>P.S.  Is the Supra 2400zi *completely* compatible with the ZorroII/III spec.
DH>>      I also heard that it's device driver is buggy, any comments?
DH>
DH>I have one, and haven't had any trouble with it.  It works in my 2000 at home,
DH>and seems to work fine in a 3000 at least for a short test on several
DH>occasions.  The device driver seems to work OK with ATalk-III as a terminal,
DH>I haven't tried anything more complex with it.

On this topic, I'm wondering if anyone knows how to drop the DTR on one of the
Supra 2400zi modems.  I have a need to drop DTR on this port, but I am running
in shared mode, so the 'close and re-open' obviously does not work (And it's a
bad idea to rely on this anyways).  ASDG has a real easy command to the
siosbx.device - Does Supra have something similar for their modem0.device? If not,
does anyone know the hardware registers (IE: Offsets from the AutoConfig start for
the card) in order to control the DTR?  I've had to HardWire a DTR control for
Serial.Device (Internal) since Commodore will not fix their Serial.Device.

Thanks for any help.


DH>Dave Haynie Commodore-Amiga (Amiga 3000) "The Crew That Never Rests"
DH>   {uunet|pyramid|rutgers}!cbmvax!daveh      PLINK: hazy     BIX: hazy

---
  Opinions expressed in this message are my Own.  My Employer does not even
know what these networks ARE.

  Russell McOrmond   rwm@Atronx.OCUnix.On.Ca   {fts1,alzabo,...}!atronx!rwm 
  FidoNet 1:163/109  Net Support: (613) 230-2282
  Amiga-Fidonet Support  1:1/109