Path: utzoo!censor!geac!torsqnt!news-server.csri.toronto.edu!cs.utexas.edu!wuarchive!zaphod.mps.ohio-state.edu!unix.cis.pitt.edu!dsinc!syd
From: syd@DSI.COM (Syd Weinstein)
Newsgroups: comp.sys.apollo
Subject: Re: Having trouble with 10.3 upgrade
Summary: I'd better summarize before my inbox overflows...
Message-ID: <1990Dec13.194548.1770@DSI.COM>
Date: 13 Dec 90 19:45:48 GMT
References: <1990Dec13.052150.22853@DSI.COM>
Organization: Datacomp Systems, Inc., Huntingdon Valley, PA 19006
Lines: 25

In article <1990Dec13.052150.22853@DSI.COM> syd@dsinc.DSI.COM (Syd Weinstein) writes:
>Just installed SR10.3 on a DN4500, having a problem.  Am trying
>to bring up the node, and every time I try a tcp function (such
>as ftp, or anything) I get a message in my DM area about an
>improper X function and the process being disconnected.  The process
>seems to be tcpd, because it immediately exits.  Then I have to
>shut down the node and reboot, lest the node totally lockup.
It appears it was a late night, and I had a typo in the hosts file.
If you have an ip address conflict, two nodes with the same ip
address, this is what it does, just give a message about an illegal
X function, and then exit.  I fixed that and now tcpd stays up.

>Also, how do I rename my //node_..... to the old name I used to
>use?  I want to change the workstation name (in other words)
Many people told me about ctnode/uctnode, which I had tried at
an older rev and got errors from and never did get the uctnode to
work quite right, at 10.3 it worked fine.


Thanks to all for their help.
-- 
=====================================================================
Sydney S. Weinstein, CDP, CCP                   Elm Coordinator
Datacomp Systems, Inc.                          Voice: (215) 947-9900
syd@DSI.COM or dsinc!syd                        FAX:   (215) 938-0235