Xref: utzoo comp.sys.dec:4708 comp.os.vms:33457
Path: utzoo!attcan!uunet!know!zaphod.mps.ohio-state.edu!wuarchive!udel!haven!decuac!ufp.dco.dec.com!murphy
From: murphy@ufp.dco.dec.com (Rick Murphy)
Newsgroups: comp.sys.dec,comp.os.vms
Subject: Re: How do you set the default BOOT device on a VS3200?
Message-ID: <1990Dec11.154251.9252@decuac.dec.com>
Date: 11 Dec 90 15:42:51 GMT
References: <90341.154758KENCB@SLACVM.SLAC.STANFORD.EDU>
Reply-To: murphy@burfle.dco.dec.com
Organization: Digital Equipment Corporation, Landover MD
Lines: 20

In article <90341.154758KENCB@SLACVM.SLAC.STANFORD.EDU>,
KENCB@SLACVM.SLAC.STANFORD.EDU writes:
>    PLEASE, how can I set the default BOOT device to XQA0 on a
>VS3200!?
Brad Wherry had the right answer (SET BOOT XQA0) but..
There are two major revisions of the console ROMs on KA650 processors.
The early ones
used the same sort of 'sniffer' boot as the MicroVAX II.. which, it
appears, is what you
have. The newer ROMs have a bunch of new commands, including the ability
to
set the boot device.

I doubt that there's any FCO to upgrade the ROMs. 
	-Rick
--
Rick Murphy, WA1SPT/4			DEC Washington ULTRIX Resource Center
Domain:  murphy@burfle.dco.dec.com -or- murphy@ufp.enet.dec.com
Bang:    decwrl!ufp.enet!murphy		Ding:  (301) 306-2985
Disclaimer: This nonsense came from an AI program written in TECO. Ignore it.