Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!swrinde!elroy.jpl.nasa.gov!sdd.hp.com!hp-pcd!hpcvra.cv.hp.com!rnews!hpcvbbs!akcs.jsims
From: akcs.jsims@hpcvbbs.UUCP (J. R. Sims, III)
Newsgroups: comp.sys.handhelds
Subject: Re: DTE48 and Packet
Keywords: terminal packet radio
Message-ID: <2767fd06:1436.2comp.sys.handhelds;1@hpcvbbs.UUCP>
Date: 13 Dec 90 22:40:09 GMT
References: <1990Dec13.020335.13500@isis.cs.du.edu> <2767f396:1436.1comp.sys.ha
Lines: 7

You have two options:
1) run some sort of communications package on the PC.
2) use the mode command to set up the PC's serial port, and the ctty
     command to transfer control to the serial port.  DOS does not
     support XON/XOFF, so you will either lose characters or have to
     use a low baud rate.

Rob