Xref: utzoo comp.sys.ibm.pc.hardware:3858 comp.sys.ibm.pc.misc:4756
Path: utzoo!utgpu!cunews!bnrgate!bwdls61.bnr.ca!bwdls58!mlord
From: mlord@bwdls58.bnr.ca (Mark Lord)
Newsgroups: comp.sys.ibm.pc.hardware,comp.sys.ibm.pc.misc
Subject: Re: QEMM and SCSI host adaptors
Keywords: qemm scsi 386
Message-ID: <5125@bwdls58.UUCP>
Date: 16 Dec 90 13:31:39 GMT
References: <19074@yunexus.YorkU.CA> <4679@umbc3.UMBC.EDU>
Sender: mlord@bwdls58.UUCP
Reply-To: mlord@bwdls58.bnr.ca (Mark Lord)
Organization: Bell-Northern Research, Ottawa, Canada
Lines: 19

In article <4679@umbc3.UMBC.EDU> chuck@umbc5.umbc.edu.UUCP (Chuck Rickard) writes:
<I have a WD-7000 FASST SCSI controller and I have a dickens of time trying to
<run QEMM 5.1.  The program crashes WP 5.1 when attempting a spell check and
<won't load things into high memory.  The plus side is that it is faster than
<using HIMEM from Microsoft, although it not as reliable.
<
<Any help in this matter would also be appreciated by me.  Thanks!

Two possible problems come to mind:

	1. Try setting a bigger DMA= parameter, as described in the QEMM docs.
	2. Perhaps your SCSI has some extra h/w that is mapped in to the 
		upper address space.  The docs for it ought to mention it
		if this is the case.  You could then EXCLUDE= that space.
-- 
 ___Mark S. Lord__________________________________________
| ..uunet!bnrgate!mlord%bmerh724 | Climb Free Or Die (NH) |
| MLORD@BNR.CA   Ottawa, Ontario | Personal views only.   |
|________________________________|________________________|