Xref: utzoo comp.sys.mac.hardware:7211 comp.sys.mac.wanted:1950 comp.sys.mac.misc:6641
Path: utzoo!utgpu!cunews!mitel!testeng1!stanfiel
From: stanfiel@testeng1.misemi (Chris Stanfield)
Newsgroups: comp.sys.mac.hardware,comp.sys.mac.wanted,comp.sys.mac.misc
Subject: Re: Any fan available for the 13" Apple RGB?
Message-ID: <5699@testeng1.misemi>
Date: 11 Dec 90 16:22:34 GMT
References: <VLD^%P^@rpi.edu>
Reply-To: stanfiel@testeng1.UUCP ()
Distribution: usa
Organization: Mitel CAE Services
Lines: 28

In article <VLD^%P^@rpi.edu> omd@pawl.rpi.edu (Eric P. Scholz) writes:
>Hi...
>
>	Is there any kind of specially designed fan available for the 
>standard 13" Applecolor RGB?  I tried using those regular AC fans

You could try using a DC fan. There are several varieties available
from people such as Rotron. I believe that even Radio Shack have one
available. You will have to tap into the internal DC supply of your
monotor to power it, or use a plug-in power pack (ac adaptor). The
most common voltage for these fans is 12 vdc. You shouldn't need a
very big fan. A typical unit from Rotron would be as follows:

	Series: Sprint DC
	Part no. ST12A3
	Voltage: 12 vdc (also available in 24v)
	Running current: 280 mA
	Inrush current: 600 mA
	CFM: 34
	Price: Probably less than US$20.00
	Noise: 38.6 dBA (i.e. very quiet)
	Size: 3.15" square by 1.25" deep

Hope this helps!

Chris Stanfield, Mitel Corporation: E-mail to:- uunet!mitel!testeng1!stanfiel
(613) 592 2122 Ext.4960
We do not inherit the world from our parents - we borrow it from our children.