Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!swrinde!zaphod.mps.ohio-state.edu!think.com!mintaka!snorkelwacker.mit.edu!bloom-picayune.mit.edu!athena.mit.edu!josh
From: josh@athena.mit.edu (Josh Hartmann)
Newsgroups: comp.sys.mac.misc
Subject: Re: Why I can't print under MultiFinder
Keywords: I DISCOVERED the problem!
Message-ID: <1990Dec15.013030.22530@athena.mit.edu>
Date: 15 Dec 90 01:30:30 GMT
References: <138@atux01.UUCP>
Sender: news@athena.mit.edu (News system)
Organization: Massachusetts Institute of Technology
Lines: 17

In article <138@atux01.UUCP>, jlc@atux01.UUCP (Jim Collymore) writes:
|> Well, if SuperSpool doesn't know which 
|> whether you're running Finder or MultiFinder after it loads, it gets "confused."
|> This results in printing problems with MultiFinder for some reason.
|> So if you find that you are having this problem, and you are using the
|> "ToMultifinder" INIT, remove "ToMultiFinder from your system folder and you
|> should be fine.

Don't you think you'll be OK if you made ToMultiFinder load and give you that
choice BEFORE SuperSpool loads? Just put the letter "U" before the name of 
SuperSpool, and it might work.

-- 
 ___  _   __            _  __  ___       _             
  |  / \ |_  |_|   |_| |_| |_|  |  |\/| |_| |\ | |\ |  MIT never likes what I
\_/  \_/ __| | |   | | | | | \  |  |  | | | | \| | \|  write. Why start now?
INTERNET/josh@athena.mit.edu UUCP/mit-eddie!mit-athena!josh BITNET/your problem