Path: utzoo!utgpu!news-server.csri.toronto.edu!rutgers!cs.utexas.edu!swrinde!elroy.jpl.nasa.gov!jarthur!uunet!comp.vuw.ac.nz!waikato!aukuni.ac.nz!russell From: russell@ccu1.aukuni.ac.nz (Russell J Fulton;ccc032u) Newsgroups: comp.sys.sgi Subject: hostname and domain name server. Message-ID: <1990Dec16.212236.6857@ccu1.aukuni.ac.nz> Date: 16 Dec 90 21:22:36 GMT Distribution: comp Organization: University of Auckland, New Zealand. Lines: 26 We are running 3.3.1 on a 4D/240s although the problems with installing the dns occurred when we were on 3.2. When we installed the domain name server (named) we found that we had to change our hostname to be a fully qualified internet address (or at least that is what the SGI documentation said). i.e ccu1.aukuni.ac.nz. Previously hostname had been set to ccu1. Recently I installed the elm mail package (Which is GREAT BTW.) I had troubles with return addresses for local mail. After posting a note to comp.mail.elm and receiving a prompt response it became clear that the problem was that elm expected hostname to return the first part of the name. When I responded that we had to have it with a full domain name because our name sever would not work the reply was that 'Your dns is broken'. Has anybody else had this problem? Is there anybody out there running named with just the single name in the hostname. Merry Christmas and a big thank you to all of you who have helped me out during the year. Russell. -- Russell Fulton, Computer Center, University of Auckland, New Zealand.