Path: utzoo!utgpu!cunews!bnrgate!brtph3!brchh104!brchs1!bnr.ca!rice.edu!sun-spots-request
From: asuvax!romed!donny@ncar.ucar.edu (Donny E. Closson)
Newsgroups: comp.sys.sun
Subject: Re: Sparcengine 1E serial pinout needed
Keywords: Hardware
Message-ID: <743@brchh104.bnr.ca>
Date: 10 Dec 90 18:53:17 GMT
Sender: news@brchh104.bnr.ca
Organization: Sun-Spots
Lines: 18
Approved: Sun-Spots@rice.edu
X-Sun-Spots-Digest: Volume 9, Issue 396, message 15
X-Note: Submissions: sun-spots@rice.edu, Admin: sun-spots-request@rice.edu

In article <636@brchh104.bnr.ca> bob@psitech.com (Bob Posert) writes:
>I just received three Sparcengine 1e's, and the docs are "on the way." I'd
>like to get the diagnostics, etc. going, but the serial connectors use a
>vga (like an IBM pc) connector.  The local Sun office doesn't know the
>pinouts.  Can the net be of help?

	From top-bottom, left-right pins are:
	8 - RxTC ;  7 - DCD ;  6 - RTS
	5 - Rxd  ;  4 - GND ;  3 - Txd
	2 - CTS/RxC    ;    1 - DTR

	hope this helps!

Donny E. Closson                                              donny@romed.uucp
MicroAge Computer Centers, Inc.                        ..mit-eddie!romed!donny
Technical Services Group                             ..sun!sunburn!romed!donny
Tempe, AZ                                                   ..ucsd!romed!donny
(602) 968-3168 Ext 2216                                   ..asuvax!romed!donny