Path: utzoo!attcan!uunet!edi386!eddjp From: eddjp@edi386.UUCP ( Dewey Paciaffi ) Newsgroups: comp.unix.aix Subject: Re: Flaky behavior after installing 3002 upgrade Message-ID: <127@edi386.UUCP> Date: 10 Dec 90 14:57:58 GMT References: Reply-To: eddjp@edi386.UUCP ( Dewey Paciaffi ) Organization: J.M. Huber Corp., Edison,NJ Lines: 29 In article henkel@nepjt.ncsu.edu (Chuck Henkel) writes: - -I just installed the 3002 upgrade to a 320 system and I am seeing some -erratic behavior. I'm curious whether other people are having similar -problems or did I just screw something up. - -Notes: - -- Upgrade applied from tape. - -- System was at level 3000, *not* 3001, when I applied the PKGID U401202 - Release 310 tape IBM sent me. IBM guy knew I was at 3000 when he - sent me the tape, so this shouldn't be the problem. - -Problems: - -1) The main problem is that dbx causes the entire system to crash with - the flashing "888" led display. The hidden message is 102 300 0c0, - which is supposed to mean "Data storage interrupt - processor type" I began getting this particular interrupt while backing up NFS file systems. It turned out that I was running out of disk space (Data Storage) in my /tmp filesystem. While I'm not sure exactly what the correlation is, throwing a few more megabytes into /tmp cured my problem. I don't remember if this happened pre-3002 or not. -- Dewey Paciaffi ...!uunet!edi386!eddjp