Xref: utzoo comp.lsi.cad:784 comp.graphics:15109
Path: utzoo!attcan!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!swrinde!elroy.jpl.nasa.gov!sdd.hp.com!wuarchive!psuvax1!psuvm!trearn!trmetu!c37117
From: C37117@TRMETU.BITNET (Mr. Muhammad Javed Iqbal Chaudhry)
Newsgroups: comp.lsi.cad,comp.graphics
Subject: Help needed on vectorising the Scanner inputs
Message-ID: <90355.115018C37117@TRMETU.BITNET>
Date: 21 Dec 90 16:17:06 GMT
Organization: Middle East Technical University - Computer Center
Lines: 11

Hi
I have to put a number of drawings into computer and use them later in AutoCad
on an IBM pc.Doing it with a tablet/digitizer is unwanted due to time
constraints.So the alternative is to read them with a scanner and digitize
(vectorize) the scanned drawing and then import it into AutoCad.If anyone
can help with how to do it or by providing me any software if any one has
written it or its final exeutable file,I shall be thankful to him/her.
  /| /|      --//||  //--  /--|     //----//---  /|  /    M.Javed Iqbal
 / |/ |       //_|| //_   /   |    //    //___| /_| /      C37117   at
/     |  /___//  ||//___ /___/    //____//____|/  |/__    Trmetu.Bitnet
                                      ---