Path: utzoo!attcan!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!uwm.edu!bionet!agate!ucbvax!pnet01.cts.com!cwr
From: cwr@pnet01.cts.com (Will Rose)
Newsgroups: comp.os.cpm
Subject: Wordstar and the high bit
Message-ID: <009414CF0E8414E0.000010C0@dcs.simpact.com>
Date: 17 Dec 90 09:11:42 GMT
Sender: usenet@ucbvax.BERKELEY.EDU
Organization: The Internet
Lines: 31

Generally the first thing you need on a cpm/m machine is a comms program,
to dig around BBSs for old software - and the second thing is a filter to
strip the junk out of the capture buffers.  You can write it in any
language you like, but you will surely need it; quite often pip..[Z]
makes an acceptable substitute.

Wordstar obviously had this question come up too often, because they put
a 'print to ASCII file' output into CP/M 4.0, and into all subsequent
(MSDOS) versions.  If you are editing, not telecommunicating, and don't
want the stuff there in the first place, you can set a flag in Wordstar
so it comes up in the N mode as a default; then you can only do D editing
from the main menu.  Or use vde, which doesn't put junk in the file until
you tell it to.

I've never had Wordstar (3.0 or 3.3) set a bit in an N-edited file at the
cursor position; which version were you running?

The real problem is a file with a premature ^Z, so that nothing beyond that
point can be seen by an editor.  DDT is then the only cure.

Good luck, anyway - Will
-----------------------------------------------------------------------
"If heaven too had passions  | Will Rose
     even heaven would       | UUCP: {nosc ucsd hplabs!hp-sdd}!crash!pnet01!cw
     grow old."  -  Li Ho.   | ARPA: crash!pnet01!cwr@nosc.mil
                             | INET: cwr@pnet01.cts.com


UUCP: {nosc ucsd hplabs!hp-sdd}!crash!pnet01!cwr
ARPA: crash!pnet01!cwr@nosc.mil
INET: cwr@pnet01.cts.com