Path: utzoo!attcan!telly!lethe!torsqnt!news-server.csri.toronto.edu!cs.utexas.edu!samsung!munnari.oz.au!labtam!eyrie!phoenix!billy From: billy@phoenix.pub.uu.oz.au (Jeff Coleman) Newsgroups: comp.sys.amiga Subject: Re: Another problem with A2320 in overscan area Message-ID: <1990Dec19.105005.16012@phoenix.pub.uu.oz.au> Date: 19 Dec 90 10:50:05 GMT References: <90345.212323CJC105@psuvm.psu.edu> <1727@syteke.be> <00gj02a.04B501@JUTS.ccc.amdahl.com> Organization: Phoenix ComSystem. Public UNIX Melbourne Australia. Lines: 36 In <00gj02a.04B501@JUTS.ccc.amdahl.com> rmm20@ccc.amdahl.com (Robert Mitchell) writes: >In article <1727@syteke.be> jim@syteke.be (Jim Sanchez) writes: >>I wish I could adjust my size control sufficiently to fill the >>physical screen with a raster. Does anyone know if a "Redmond Cable" >>is required with the NEC 3D and the A2320. I know I had to get a >>buffered cable for the NEC to use it with the stock 2000. >>-- >>Jim Sanchez | jim@syteke.be (PREFERRED) >>Hughes LAN Systems | OR uunet!mcsun!ub4b!syteke!jim >>Brussels Belgium | OR jim@hls.com >>-- >>Jim Sanchez | jim@syteke.be (PREFERRED) >>Hughes LAN Systems | OR uunet!mcsun!ub4b!syteke!jim >>Brussels Belgium | OR jim@hls.com >Just a note: I am looking at a NEC 3D screen as I write this. >It is on a "stock" 2000. >All I did was wire up a liitle cross-wire adapter to go from >the NEC to the DB23 on the 2000. No logic; just wires. >Works great.-- >UUCP: rmm20@juts.ccc.amdahl.com >DDD: 408-746-8491 >USPS: Amdahl Corp. M/S 205, 1250 E. Arques Av, Sunnyvale, CA 94086 >BIX: bobmitchell Just for later Reference could you list the wireouts from the 3D -> db23 thanx Jeff Coleman ------------------------------------------------------------------------------- | Jeff Coleman [ Billy ] | " (2B || !2B) ? :; " | | billy@phoenix.pub.uu.oz.au | "ok so it don't look so good visually !" | -------------------------------------------------------------------------------