Path: utzoo!censor!geac!torsqnt!news-server.csri.toronto.edu!cs.utexas.edu!uunet!munnari.oz.au!asgard!dogmelb!david From: david@dogmelb.dog.oz.au (David Le Blanc) Newsgroups: comp.sys.amiga.tech Subject: Re: Help Needed Diagnosing Possible Hardware Problem Summary: digiview proglems. ARES (Dynamic HAM) Wont Work. Message-ID: <132@dogmelb.dog.oz.au> Date: 19 Dec 90 04:00:22 GMT References: Organization: CSIRO Division of Geomechanics Australia Lines: 24 In article , paul@wa1omm.UUCP (Paul MacDonald) writes: > > o DigiView V4.0 smears quite a bit. This generally happens after > something has been digitized and I pull down a menu. Usually, > releasing the menu leaves a shadow of a menu selection on the screen. I have a different problem. When using digiview (or dynashow for that matter) and the machine is *TRYING* to display a dynamic picture, be it Dyna-Ham, Dyna-Hires or ARES, the screen jitters violently from left to right, at scan-line intervals.. the result is a horrific mess, and yet cannot be duplicated on any other machine I have tried. STATS : A500, Rev 5, normal (FAT) Agnus and denise. A590 (location zero patched.) with 2 Megs. NO-Butchers. My other machine WITH the rom switch and boot switch butcherings works fine though... > | Usenet: ...virgin!ubbs-nh!wa1omm!paul | Why such a HUGE .sig? sig = 1/ ??? Oops, sorry, forget I said that.... -- Email: david@dogmelb.dog@munnari.oz | Division of Geomechanics, TEL. (03) 881 1355 | CSIRO, P.O. Box 54 FAX (03) 881 2052 | Mt Waverley 3149, | AUSTRALIA.